© 2016 Floline Architectural Systems, LLC
900R Panel 900R Panel

900R Panel

The 900R Panel is a structural wall panel with 1.5" deep ribs, 5.9" o.c. for an overall cover width of 35.4". The panel is installed with exposed fasteners. The panel is available straight, curved convex, curved concave or serpentine (curved convex & concave).
Gauge
Substrate
G-90 Galv. Steel
Aluminum
Galvalume®  Clear Coat 
26, 24, 22 (20, 18)*    
26, 24, 22 (20, 18)*
.032, .040, .050, .063
Stainless Steel
24
NOTE Panel Cover Width: 35.4 Straight Panel Lengths: Cut to customer specifications (5- 0 min; less than 5- 0 available w/ surcharge Colors: Choice of 30 standard colors Finish: Kynar 500 (solid or metallic) Curving:  	Convex - 37" minimum radius  	Concave - 15 " minimum radius 	Panel Arc Length: 26'- 0" max. (Not recommended for 26 ga steel or .032 aluminum) Mitered Corners: Factory engineered and fabricated from same material as panels; available in straight or curved panels Serpentine: Curved convex and concave
*  Subject to Minimum Quantities Galvalume ® Clear Coat and Stainless Steel -   Available as Unpainted Only Minimum Radius Will Vary with Gauge and Intrinsic Properties of the Specific Substrate
Get Adobe Flash Player
© 2016 Floline Architectural Systems, LLC
900R Panel 900R Panel

900R Panel

The 900R Panel is a structural wall panel with 1.5" deep ribs, 5.9" o.c. for an overall cover width of 35.4". The panel is installed with exposed fasteners. The panel is available straight, curved convex, curved concave or serpentine (curved convex & concave).
Gauge
Substrate
G-90 Galv. Steel
Aluminum
Galvalume®  Clear Coat 
26, 24, 22 (20, 18)*    
26, 24, 22 (20, 18)*
.032, .040, .050, .063
Stainless Steel
24
NOTE Panel Cover Width: 35.4 Straight Panel Lengths: Cut to customer specifications (5- 0 min; less than 5- 0 available w/ surcharge Colors: Choice of 30 standard colors Finish: Kynar 500 (solid or metallic) Curving:  	Convex - 37" minimum radius  	Concave - 15 " minimum radius 	Panel Arc Length: 26'- 0" max. (Not recommended for 26 ga steel or .032 aluminum) Mitered Corners: Factory engineered and fabricated from same material as panels; available in straight or curved panels Serpentine: Curved convex and concave
*  Subject to Minimum Quantities Galvalume ® Clear Coat and Stainless Steel -   Available as Unpainted Only Minimum Radius Will Vary with Gauge and Intrinsic Properties of the Specific Substrate