© 2016 Floline Architectural Systems, LLC
Tel: 866-FLOLINE Tel: 866-356-5463 Contact Us
7/8” Corrugated Panel

7/8” Corrugated Panel

The 7/8" Corrugated Panel is a structural roof or wall panel with 7/8" deep ribs, 2.67 " o.c. for an overall cover width of either 37 1/3" or 31 3/8" depending on gauge and availablity. The panel is installed with exposed fasteners. The panel is available straight or curved (concave or convex).
Gauge
Substrate
G-90 Galv. Steel
Galvalume Plus®
Aluminum
.032, .040
Panel Cover Width: 37.33" or 31.375" for single lap wall applications (Recommend double lap for roof applications) Straight Panel Lengths: Cut to customer specifications ( 6'- 0" min.) Colors: Choice of 30 standard colors Finish: Kynar 500® (solid or metallic) or Siliconized Modified Polyester Curving: • Concave or Convex - 2'- 0" minimum radius • (only available in 37.33" cov. width and 24 ga to 18 ga steel, or .032or .040 aluminum) Availability: • 37.33" cov. width in 24 ga to 18 ga steel; .032 or .040 aluminum • 31 3/8" cov. width in 26 ga to 22 ga. steel NOTE • * Subject to Minimum Quantities • Galvalume Plus® and Stainless Steel - Available as Unpainted Only • Minimum Radius Will Vary withGauge and Intrinsic Properties of the Specific Substrate
Stainless Steel
24
26, 24, 22, (20, 18)* 
26, 24, 22, (20, 18)* 
Get Adobe Flash Player
© 2016 Floline Architectural Systems, LLC
Tel: 866-356-5463 Contact Us
7/8” Corrugated Panel

7/8” Corrugated Panel

The 7/8" Corrugated Panel is a structural roof or wall panel with 7/8" deep ribs, 2.67 " o.c. for an overall cover width of either 37 1/3" or 31 3/8" depending on gauge and availablity. The panel is installed with exposed fasteners. The panel is available straight or curved (concave or convex).
Gauge
Substrate
G-90 Galv. Steel
Galvalume Plus®
Aluminum
.032, .040
Panel Cover Width: 37.33" or 31.375" for single lap wall applications (Recommend double lap for roof applications) Straight Panel Lengths: Cut to customer specifications ( 6'- 0" min.) Colors: Choice of 30 standard colors Finish: Kynar 500® (solid or metallic) or Siliconized Modified Polyester Curving: • Concave or Convex - 2'- 0" minimum radius • (only available in 37.33" cov. width and 24 ga to 18 ga steel, or .032or .040 aluminum) Availability: • 37.33" cov. width in 24 ga to 18 ga steel; .032 or .040 aluminum • 31 3/8" cov. width in 26 ga to 22 ga. steel NOTE • * Subject to Minimum Quantities • Galvalume Plus® and Stainless Steel - Available as Unpainted Only • Minimum Radius Will Vary withGauge and Intrinsic Properties of the Specific Substrate
Stainless Steel
24
26, 24, 22, (20, 18)* 
26, 24, 22, (20, 18)*