© 2016 Floline Architectural Systems, LLC
4 Deep Rib Panel

4” Deep Rib Panel

The 4” deep Rib Panel is a structural roof panel with 4" deep ribs,12" o.c. for an overall cover width of 24". The panel is installed with exposed fasteners. The panel is available straight or curved (convex only).
Gauge
Substrate
Galvalume® Steel
Galvalume® Clear Coat
22, (20)*, 18
22, (20)*, 18
Panel Cover Width: 24 Straight Panel Lengths: Cut to customer specifications (6- 0 min.) Colors: Choice of up to 9 standard colors Finish: Kynar 500 (solid or metallic) NOTE 4 Deep Rib Panel
*  Subject to Minimum Quantities Galvalume ® Clear Coat - Available as Unpainted Only Minimum Radius Will Vary with Gauge and Intrinsic Properties of the Specific Substrate
Curving:  	Convex Only - 30- 0 minimum radius 	Panel Arc Length: 26'- 0" max. Get Adobe Flash Player

Gravity Load Table (PSF)

Spans
Substrate
10- 0 11- 0 12- 0 13- 0 14- 0 22 ga Steel 22 ga Steel 22 ga Steel 1 107 88 74 63 55 2 100 82 69 59 51 3 125 103 94 74 64 55 20 ga Steel 20 ga Steel 20 ga Steel 1 121 100 91 77 62 2 117 96 88 75 60 3 146 121 110 93 74 54 52 65 47 46 57 18 ga Steel 18 ga Steel 18 ga Steel 1 147 121 102 87 75 2 146 121 101 86 74 3 182 151 127 108 93 65 65 81 57 57 67
The allowable loads are based on stress only The maximum recommended panel length is 26’ for curved panels and 32’ for straight panels.
48 44 15- 0 16- 0 49 42 39
© 2016 Floline Architectural Systems, LLC
4 Deep Rib Panel

4” Deep Rib Panel

The 4” deep Rib Panel is a structural roof panel with 4" deep ribs,12" o.c. for an overall cover width of 24". The panel is installed with exposed fasteners. The panel is available straight or curved (convex only).
Gauge
Substrate
Galvalume® Steel
Galvalume® Clear Coat
22, (20)*, 18
22, (20)*, 18
Panel Cover Width: 24 Straight Panel Lengths: Cut to customer specifications (6- 0 min.) Colors: Choice of up to 9 standard colors Finish: Kynar 500 (solid or metallic) NOTE 4 Deep Rib Panel
*  Subject to Minimum Quantities Galvalume ® Clear Coat - Available as Unpainted Only Minimum Radius Will Vary with Gauge and Intrinsic Properties of the Specific Substrate
Curving:  	Convex Only - 30- 0 minimum radius 	Panel Arc Length: 26'- 0" max.

Gravity Load Table (PSF)

Spans
Substrate
10- 0 11- 0 12- 0 13- 0 14- 0 22 ga Steel 22 ga Steel 22 ga Steel 1 107 88 74 63 55 2 100 82 69 59 51 3 125 103 94 74 64 55 20 ga Steel 20 ga Steel 20 ga Steel 1 121 100 91 77 62 2 117 96 88 75 60 3 146 121 110 93 74 54 52 65 47 46 57 18 ga Steel 18 ga Steel 18 ga Steel 1 147 121 102 87 75 2 146 121 101 86 74 3 182 151 127 108 93 65 65 81 57 57 67
The allowable loads are based on stress only The maximum recommended panel length is 26’ for curved panels and 32’ for straight panels.
48 44 15- 0 16- 0 49 42 39 Spans
Substrate
22 ga Steel 22 ga Steel 22 ga Steel 1 2 3 20 ga Steel 20 ga Steel 20 ga Steel 1 2 3 18 ga Steel 18 ga Steel 18 ga Steel 1 2 3